The Titan Tour Bag is a padded nylon zippered carry bag that protects your Titan loudspeakers. The Tour Bag provides extra protection during transit, in addition it is designed for both indoor and outdoor operations.

The front of the bag can be removed, revealing a heavy duty mesh screen that protects the transducers during use. The front panel is held in place by heavy duty Velcro and facilitates quick set-up.

An additional Velcro access panel is located over the input panel and allows full connectivity and control adjustment while the unit remains protected. There's also an entry point at the base that allows use of a pole mount while the loudspeaker is still encased.

Specifications:

* Material: Reinforced Nylon
* Fasteners: Velcro
* Shipping Volume: .001cbm
* Shipping Weight: 1kg
* Warranty: 7 Days

The Titan Tour Bag is a padded nylon zippered carry bag that protects your Titan loudspeakers. The Tour Bag provides extra protection during transit, in addition it is designed for both indoor and outdoor operations.

The front of the bag can be removed, revealing a heavy duty mesh screen that protects the transducers during use. The front panel is held in place by heavy duty Velcro and facilitates quick set-up.

An additional Velcro access panel is located over the input panel and allows full connectivity and control adjustment while the unit remains protected. There's also an entry point at the base that allows use of a pole mount while the loudspeaker is still encased.

Specifications:

* Material: Reinforced Nylon
* Fasteners: Velcro
* Shipping Volume: .001cbm
* Shipping Weight: 1.5kg
* Warranty: 7 Days

The Titan Tour Bag is a padded nylon zippered carry bag that protects your Titan loudspeakers. The Tour Bag provides extra protection during transit, in addition it is designed for both indoor and outdoor operations.

The front of the bag can be removed, revealing a heavy duty mesh screen that protects the transducers during use. The front panel is held in place by heavy duty Velcro and facilitates quick set-up.

An additional Velcro access panel is located over the input panel and allows full connectivity and control adjustment while the unit remains protected. There's also an entry point at the base that allows use of a pole mount while the loudspeaker is still encased.

Specifications:

* Material: Reinforced Nylon
* Fasteners: Velcro
* Shipping Volume: .001cbm
* Shipping Weight: 1.8kg
* Warranty: 7 Days

The Wharfedale Pro TITAN8AMK2 Active 720W PRG 8" 2-Way ABS Moulded Speaker. Incorporates a high grade Bi-amp Class D and Class A/B Amplifiers. Titans also incorporate intelligent electronics, such as a full protection system, which safeguards it from overload, and allows reliable operation right up to the power limit.
A compact powerhouse at home and almost anywhere - stage, studios, rehearsals, theatres, as DJ monitors or Front Of House.

Buy one and get $25 off the second one, Click Below

Specifications

* Power: 180W
* Impedance: 4 ohms
* Tweeter: Compression Driver
* EQ: 2 Band + Volume
* Thermal protection: Amplifier shutdown, auto reset
* Connections: 1 x Neutrik combo (w/ switchable mic preamp). 1 x balanced output
* Weight: 8.15kg
* Dimensions / Weight: 330 x 490 x 290mm / 8.15Kg
* Shipping Volume: .047cbm
* Shipping Weight: 8kg
* Warranty: 12 Months

The Wharfedale TITAN12D Active 300W RPM 12" 2-Way ABS Moulded Speaker. Qubit processor; features true independent LF and HF signal limiting
Wharfedale Pro's Titan 12D - 1200W PRG models now use bi-amplified, Class D technology, creating a more efficient and powerful system, even lighter than the previous generation. This model also introduced Qubit, Wharfedale’s powerful and precise 24-bit 192kHz DSP processing. With advanced adaptive multi-band dynamic processing and filtering, Qubit fine tunes your system to sound natural and open.

Along with that. true independent adaptive LF and HF signal limiting helps protect the units against thermal damage and driver over-excursion. These are a quality speaker unit, in a heavy duty ABS cabinet making it suitable for many installed or touring uses.

The TITAN12D also includes a moisture proof woofer - so they can withstand outdoor conditions.

Buy a speaker and get $40 a second speaker, click below

Specifications * Power: 1200W PRG
* Max SPL: 127dB
* Hum and noise: -90dB
* Input sensitivity: Line (low Gain): 0dBu Mic (Hi Gain): -40dBu
* Maximum input level: +20dBu
* input impedance: Balanced: 20kohm unbalanced: 10kohm
* Equalisation: High(+10dB) 10KHz Shelving/Low(+5dB) 100Hz Shelving
* Monitor filter: 90Hz HPF filter for stage monitor use
* Remote gain attenuator: 3 pin Euroblock connector for remote volume adjustment of the titan12D Linear control of the volume is achieved by variation of the applied voltage
* Limit LED: Shows when either signal limiter is active (LF or HF)
* Amplifier Protection: Power switch on/off mute; DC detection; Overload and short-circuit detection; thermal/heat sink protection; output mute/auto reset
* Power amplifier type: Dual Class D modules (LF and HF)
* AC power options: JP, FG, UK, SA, US
* Colour: Black
* Dimensions / Weight: 556x384x312mm / 12.4Kg
* Gross weight: 15.5kg
* Rating: 250W RMS + 50W RMS
* Shipping Volume: .12cbm
* Shipping Weight: 15.5kg
* Warranty: 12 Months

The Wharfedale TITAN15D Active 1600W PRG 15" 2-Way ABS Moulded Speaker. Qubit processor; features true independent LF and HF signal limiting
The first of the Titan range upgraded to bi-amplified, Class D technology, Active 15D speaker became a more efficient and powerful system - actually lighter, but more powerful than the previous generation. It also introduced Qubit 24-bit processing - its multi-band dynamic filtering helping fine tune the speaker to sound more natural and open.

Further protection measures also came with this upgrade – true independent adaptive LF and HF signal limiting guarding against thermal damage and driver over-excursion. A refined curved design and increased variety of input options are further improvements in this variant. And to top it off the moisture proof woofer can withstand outdoor conditions.


Buy one speaker and get $30 off the Second one, Click below

Specifications
* Power: 1600W PRG, 350W RMS + 70W RMS
* high frequency power: 70W RMS
* Hum and noise: -90dB
* input sensitivity: Line (low Gain):0dBu Mic (Hi Gain): -40dBu
* Maximum input level: +20dBu
* input impedance: Balanced: 20kohm/Unbalanced: 10kohm
* equalization: high(+10dB) 10KHz Shelving low(+10dB) 100Hz Shelving
* Monitor filter: 90HzHPF filter for stage monitor use
* Remote gain attenuator: 3 pin Euroblock connector for remote volume adjustment of the titan15D Linear control of the volume is achieved by variation of the applied voltage
* Limit LED: Shows when either signal limiter is active (LF or HF)
* Amplifier Protection: power switch on/off mute; DC detection; Overload and short-circuit detection; thermal/heat sink protection; output mute/auto reset
* Power amplifier type: Class D LF module and Class A/B HF module
* AC power options: JP, FG, UK, SA, US
* colour: Black
* Dimensions / Weight: 708x477x401mm / 22.9Kg
* Net weight: 22.9kg
* Gross weight: 27.7kg
* Max SPL: 125dB
* Dimensions / Weight: 708x477x401mm / 22.9Kg
* Shipping Volume: .209cbm
* Shipping Weight: 27.7kg
* Warranty: 12 Months